Cisco Virtual Lab is used by many Cisco training providers, including Franklin University.
(case study)
"As a big proponent of ´learning by doing´ I can honestly say that MIMIC Virtual Lab CCNA is the closest thing to having the real equipment in front of you. I have tried many different simulators but none are as easy and as comprehensive as MIMIC Virtual Lab. Two thumbs up for the great product -- a must have for anyone serious about Cisco certifications.". Matt Basham, Program Director and the Author of ´Learning by Doing´ ("St. Peterburg College)
"As an "on-demand" learning tool, the MIMIC Virtual Lab represents a realistic and highly scalable alternative to physical laboratory equipment..." Dennis Griffin, Instructor (CCSI, CCNP)
(case study)
"As a big proponent of ´learning by doing´ I can honestly say that MIMIC Virtual Lab CCNA is the closest thing to having the real equipment in front of you. I have tried many different simulators but none are as easy and as comprehensive as MIMIC Virtual Lab. Two thumbs up for the great product -- a must have for anyone serious about Cisco certifications.". Matt Basham, Program Director and the Author of ´Learning by Doing´ ("St. Peterburg College)
"As an "on-demand" learning tool, the MIMIC Virtual Lab represents a realistic and highly scalable alternative to physical laboratory equipment..." Dennis Griffin, Instructor (CCSI, CCNP)
- Repeat as many times as you want;
- Real Hands-on Lab in your office at any time;
- Get hands on time with Cisco devices without the expense of buying equipment;
- Safe environment to practice without worrying about bringing down the equipment/network and affecting other users;
- Exercise the lab using ready scenarios
- Learn at your place and schedule at your own pace and time!
- Even if you have access to the routers/switches: get an extra boost and a convenient way to do labs.
for only USD$119.00!
Retail Price $139.00
Note: If you require to run MIMIC under a Virtual Machine (eg. VMWare), please contact us for terms and conditions.
MIMIC Virtual Lab CCNA® creates a real world lab environment with a network of Cisco Routers and switches. It gives you hands-on experience on the devices without buying expensive equipment.
MIMIC Virtual Lab is for beginners interested in familiarizing themselves with the complex environment and for intermediate or expert users looking to sharpen their skills and move to a higher level. It provides a safe environment to practice. You don't have to worry about bringing down the equipment/network and affecting other users.
MIMIC Virtual Lab is for beginners interested in familiarizing themselves with the complex environment and for intermediate or expert users looking to sharpen their skills and move to a higher level. It provides a safe environment to practice. You don't have to worry about bringing down the equipment/network and affecting other users.
MIMIC gives Network Engineers the ability to practice for CCNA and other certifications instead of just reading instructions. It enables Training organizations to supply a Virtual lab to students with the classroom training or e-learning courses. Students can interact with Routers and Switches, just like with real devices.
MIMIC Virtual Lab CCNA is sold in two versions:
MIMIC Virtual Lab CCNA and
MIMIC Virtual Lab CCNA Plus. While they share most features, the differences are detailed below.
Interact with the routers and switches, just like real devices:
MIMIC Virtual Lab is for beginners interested in familiarizing themselves with the complex environment and for intermediate or expert users looking to sharpen their skills and move to a higher level. It provides a safe environment to practice. You don't have to worry about bringing down the equipment/network and affecting other users.
MIMIC Virtual Lab is for beginners interested in familiarizing themselves with the complex environment and for intermediate or expert users looking to sharpen their skills and move to a higher level. It provides a safe environment to practice. You don't have to worry about bringing down the equipment/network and affecting other users.
MIMIC gives Network Engineers the ability to practice for CCNA and other certifications instead of just reading instructions. It enables Training organizations to supply a Virtual lab to students with the classroom training or e-learning courses. Students can interact with Routers and Switches, just like with real devices.
MIMIC Virtual Lab CCNA is sold in two versions:
MIMIC Virtual Lab CCNA and
MIMIC Virtual Lab CCNA Plus. While they share most features, the differences are detailed below.
- Reconfigure in accordance to your needs!
- A large set of IOS commands are supported for router & switch operations.
- Telnet in to any of these devices from local or remote machines as if you are connecting to real devices.
- Protocols supported -Telnet, Cisco IOS
- Any number of users can connect at a time.
- View configuration information for individual devices or the entire topology
- Start or stop devices individually or in a group
- Set passwords, IP addresses, clock rates, hostname, bandwidth
- Assign routing protocols - RIP, IGRP, EIGRP, BGP, OSPF, IS-IS
- Configure IPv4 or IPv6 addresses
- VLAN configuration; Rapid-PVST configuration
- Ping/Telnet other devices in the lab
- Reload configuration using flash or TFTP protocol
- Configuration of ISDN, CDP, PPP, Frame Relay ACL and NAT protocols
- Save the configuration at a good point & start over many times as desired
- Troubleshoot by retracing the commands from the log
- Context sensitive help
- Online Tutorial for using Vlab
Interact with the routers and switches, just like real devices:
- Network of 7 devices
- Cisco Routers (2811, 3640 and 7206)
- Four Cisco Switches (2950, 3550 (2) and 6500)
- A large set of IOS Commands for Router and Switch operations
- LAN, WAN, ISDN and Serial links
- Ability to Reconfigure the lab
- Users can Telnet in to any of these devices as if they are connecting to real devices. You can open as many Telnet connections as the device supports. Users can also connect to it using a Console connection. It fully supports Cisco IOS® software.
- Tutorial: Basic IOS command line interface
- Tutorial: Configure OSPF routing protocol
- Tutorial: Configure a default route
- Tutorial: Configure a serial line
- Tutorial: Configure Standard Access List on Firewall Routers
- Tutorial: Configure Extended Access List on Firewall Routers
- Tutorial: Configure RIP routing protocol
- Tutorial: Configure BGP routing protocol
- Tutorial: Configure EIGRP routing protocol
- Tutorial: Configure eBGP mode BGP routing
- Tutorial: Configure OSPF multiple-area routing
- Tutorial: Configure Frame Relay
- Tutorial: Configure NAT
- Tutorial: Configure VLAN
- Tutorial: Configure IPv6
- Quiz: Neighbor device information and many more ...
- Logging in/out
- Get into and out of different modes - User, Privileged, Configuration, Interface
- Set passwords, IP addresses, clock rates, hostname, bandwidth
- Assign routing protocols - RIP, IGRP, EIGRP, BGP, OSPF, IS-IS
- Configure IPv4 or IPv6 addresses
- VLAN configuration; Rapid-PVST configuration
- Ping/Telnet other devices in the lab
- Save/load configurations
- Reload configuration using flash or TFTP protocol
- Configuration of ISDN, CDP, PPP, Frame Relay ACL and NAT protocols
- and many other functions required for certifications
- Start/Stop devices, individually or in a group
- Reconfigure the lab by adding and removing connections between the devices
- Save/Load a configuration of the network
- View configuration information of a device or the entire network
- Troubleshoot
- View the topology with connections and addresses
- Open Telnet sessions
- Context sensitive help